Midway Vo-Tech students achieve greater knowledge and higher wages through expert training.


 

ASSE Backflow Certified Course

ASSE Backflow Tester Class

Become licensed in cross-connection control, state regulations and the proper test procedures for reduced pressure principle, double check valve, pressure vacuum breaker, and spill-resistant vacuum breaker assemblies. Students will receive both classroom and hands on training and will take a proctored test at the end of the class. $1195.00 – Register Now 

ASSE Backflow Repairer Class

This repair training includes the servicing, repairing of backflow prevention assemblies. Must be a Journeyman or Master Plumber to enroll. Students will receive both classroom and hands on training and will take a proctored test at the end of the class. $595.00 – Register Now 

ASSE Backflow Tester & Repairer Class

Includes cross-connection control, state regulations and the proper test procedures for reduced pressure principle, double check valve, pressure vacuum breaker, and spill-resistant vacuum breaker assemblies. The repair training will include the servicing, repairing of backflow prevention assemblies. Students will receive both classroom and hands on training and will take a proctored test at the end of the class. $1650.00 – Register Now

ASSE Backflow Recertification Class

Renew your certification in cross-connection control, state regulations and the proper test procedures for reduced pressure principal, double check valve, pressure vacuum breaker, and spill resistant vacuum breaker assemblies. ASSE requires every three years from the date of your origional certification. $250.00- Register Now

16Hr Continued Education Combined w/ASSE Backflow Tester Class

 The ASSE Tester Class can be combined with 16hrs of required continuing education for plumbers. Add CE without the additional time away from work. $150.00 – Register Now 

*Individuals who currently possess a Minnesota Tester or Repairer Certification now need to have certification as an ASSE 5110 Tester and/or ASSE 5130 Repairer Certification to keep their license.

 

 


Test Prep

Master/Journeyman/City Comp Test Prep Class—Eight 4 hour classes (32hrs)

Covers all subjects that are on the State & City Comp tests. The subjects include: UPC Codes, definitions, storm sewers, determining load on drainage piping, code minimums, water pipe sizing, water pipe drawings, waste and vent sizing and much more. Our instructors work to keep current with the state codes and will make sure you have the info that you need. Have an area you know you need help in? Just ask and we will make sure we help you get it right. $640.00 Register Now

16Hr Continued Education Combined with Master/Journeyman/City Comp Test Prep Class

 The Master/Journeyman/City Comp Test Prep Class can be combined with 16hrs of required continuing education for plumbers. Add CE without the additional time away from work. $150.00 – Register Now 

 *Individuals who currently possess a Minnesota Plumbing Apprentice/Journeyman license and are preparing to take the State or City Competency Test.

HVAC-Advanced MN Mechanical and Fuel Gas Code Class—Eight 4 hour classes (32hrs)

Covers all subjects that are on the Minneapolis/St Paul Gasfitter, Warm Air Ventilation, Refrigeration, and Steam & Hot Water tests. The subjects include: General Knowledge, General Regulations, Components, Sizing and Designs, Installations, Gas Venting and much more. Required text: Minnesota Mechanical and Fuel Gas Code, (2015 Edition) & Minnesota Mechanical and Fuel Gas Code, (Errata 2015 Edition) Our instructors work to keep current with the state codes and will make sure you have the info that you need. Have an area you know you need help in? Just ask and we will make sure we help you get it right. $1200.00 Register Now

 

 


Minnesota Approved Continuing Education Classes

Midway Vo-Tech has several classes certified to help you complete your Minnesota CE requirements. The current requirements are 12 hours of plumbing code & 4 hours of “other” training.

MN UPC Plumbing 4 hr Code & 4 hr Non-Code Class

This two-part class covers Code Revisions, Fixture Requirements, Venting Notching and Misc. Code. The first part is 4 hours of Code and the second part is 4 hours on Non-Code. This class is approved for Plumbing Building Officials and Water Conditions Contractor. $80.00 Each or take both for $145.00 & save $15.00 Register Now

Plumbing 4hr Code CE Class

This 4 hour, Code class covers sections 700 thru 1100 in the new code. This class is approved for Plumbing, Building Officials, Residential Contractors and Water Conditioners. Register Now 

Plumbing 4hr Non-Code CE Class

This 4 hour, Non-Code class covers the topics of Gas and Fuel Safety and OSHA Safety codes including confined space & trench. This class is approved for Plumbing, Building Officials, Residential Contractors and Water Condition. Register Now 

MN UPC Plumbing 8 hr Code Class

This class covers sections 100 thru 600 of the new UPC code. This class is approved for Plumbing, Building Officials and Residential Contractor.  Register Now 

MN UPC Plumbing 6 hr Code & 2 hr Non-code Class 1 & 2

This class covers 6 hours of the new UPC code and 2 hours Non-code. This class is approved for Plumbing, Building Officials, water conditioners, Manufactured Home Installers, and Residential Contractor.  Register Now 

MN Residential General Contractors CE Class 1 &2

Course 1 brings you up to the date information on residential insulation, residential energy efficient homes, residential framing, and residential roof materials. Course 2 brings you up to the date information on residential energy, residential water heaters, residential heating & cooling, residential lighting, residential windows, and residential appliances.  Approved for residential contractors, building officials, and manufactured home installers.

Changes to the NEC 2014 Articles 90-393 & Changes to the NEC 2014 Articles 400-820

This course brings you an accurate, in depth coverage of the most important 2014 NEC Code changes and how they affect current and future projects. This presentation utilizes Powerpoint presentation, discussion and lecture to bring the technical language of the NEC to Electricians, Building Officials, and Manufactured Home Installers in a manner to promote code compliant systems. Register Now  

 


Student Programs

Our Student Programs are a combination of class room, technical training and hands on work experience. Our students leave our program with a certificate of completion and the ability to walk in to a position with confidence. Our program includes experience working on real jobs with real masters of their trade and all the tools needed to start on the job.

1 Year Student Plumber Program

1 Year Student Plumber Program—is a 4 day a week program that runs for 4 hours a day. It includes training in plumbing code, procedures , experience in brazing.  $14,950.00 – Register Now

4 Year Employer Sponsored Student Plumber Program

4 Year Employer Sponsored Student Plumber Program – is a 1 day a week program that runs for 4 hours. It includes training in plumbing code, procedures , experience in brazing. $9,000.00 – Register Now

10 Week Intensive Hands-On Training

Technicians are educated to better understand the theory and principles, through hands-on lab training. They will leave with the ability to preform most of the routine maintenance repairs and installation in the Plumbing, Electrical, HVAC systems and Carpentry trades. Now accepting registrations!